Remove/install ABS measuring ring - AR42.30-P-0160GG
MODEL 461, 463 (except, 463.270) with REAR AXLE 741//(except 741.171/52/53) rear axle with ABS brake system
MODEL 461 with REAR AXLE 742 rear axle with ABS brake system
MODEL 463 (except 463.270/271) with REAR AXLE 742 up to Model Year 2013 rear axle with ABS brake system,/facelift 2012
Vehicles with drum brakes on rear axle and external sensor system
Fig 1: ABS Measuring Ring Remove/Install Components - Vehicles With Drum Brakes On Rear Axle And External Sensor System
Vehicles with drum brakes on rear axle and internal sensor system
Fig 2: ABS Measuring Ring Remove/Install Components - Vehicles With Drum Brakes On Rear Axle And Internal Sensor System
Vehicles with disk brakes at the rear axle
| Removing | |||
| 1 | Remove drive shaft (2) | Model 461, 463 with drum brakes on rear axle | AR35.30-P-0620G |
| Model 461, 463 with disk brakes on rear axle | AR35.30-P-0620F | ||
| 2 | Disassemble drive shaft (2) | Model 461, 463 with disk brakes on rear axle | AR35.30-P-7351F |
| 3 | Clamp input shaft (2). | ||
| 4.1 | Use suitable tool to detach ABS measuring ring (1) from drive shaft (2) For vehicles with disk brakes and drum brake with external sensor system. | ||
| 4.2 | Unscrew slotted nut with ABS measuring ring (3) | ||
| ↓ | |||
| Disassemble and assemble rear axle shaft Model 461, 463 |
AR35.30-P-7351G | ||
| Install | |||
| 5.1 | Press on new ABS measuring ring (1) | ||
| 5.2 | Screw on slotted nut with ABS measuring ring (3) | ||
| Disassemble and assemble rear axle shaft | |||
| Model 461, 463 | AR35.30-P-7351G | ||
| 6 | Assemble (2) drive shaft | For model 461, 463 with disk brakes on rear axle | AR35.30-P-7351F |
| 7 | Install drive shaft (2) | Model 461, 463 with drum brakes on rear axle | AR35.30-P-0620G |
| Model 461, 463 with disk brakes on rear axle | AR35.30-P-0620F |