Check brake lining thickness - AP42.10-P-4253G
MODEL 460, 461, 463 with drum brakes on rear axle
MODEL 463.236 with CODE (979) Special protection version
Shown Round brake grommet
Shown Square brake grommet
| Checking | |||
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| 1 | Raise vehicle with vehicle lift | ||
| Lift/jack up vehicle | AR00.60-P-1000G | ||
| 2 | Pull grommets (1) out of inspection holes (2) | ||
| 3 | Check lining thickness of brake shoes | *BE42.10-P-1002-10A | |
| 4 | Insert grommet (1) | ||
| 5 | Lower vehicle |
TEST VALUES FOR SERVICE BRAKE
| Number | Designation | Model 460, 461, 463 | |
|---|---|---|---|
| BE42.10-P-1002-10A | Brake lining wear limit, drum brake | mm | 3.5 |