Remove/Install Towing Sensor Control Unit - AR54.21-P-0011GW
Model 463
as of Model year 2013 up to Model year 2019 /Facelift 2012
Fig 1: Towing Sensor Control Unit Component Location - As Of Model Year 2013 Up To Model Year 2019 /Facelift 2012
| Remove/install | |||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| 1 | Detach ground line from battery | Model 463 (except 463.234/236/241/242/248) as of Model year 2013 up to Model year 2019 |
AR54.10-P-0003GW |
| 2 | Remove overhead control panel control unit | ||
| AR82.20-P-1000GW | |||
| 3 | Disconnect electrical connector from ATA/tow-away protection/interior protection control unit (N26/6) | ||
| 4 | Install in the reverse order | ||
| 5 | Read out and erase the fault memory using Star Diagnosis | ||
| AD00.00-P-2000-04A |