Checking accident vehicles and vehicles possibly damaged in an accident - AR40.30-P-0400CW

MODEL 172, 204, 207, 212, 218

MODEL 217

MODEL 222, 231

	Check
1	Drive the vehicle onto the measuring station and secure using the parking brake	The measuring system must be approved by Mercedes-Benz.
2	Perform preparations for distance and comparative measurements	MODEL 172, 204, 207, 212, 218
		MODEL 172	AR40.30-P-0401V
		MODEL 204, 207	AR40.30-P-0401CW
		MODEL 212, 218	AR40.30-P-0401EW
3	Carry out distance and comparison measurements on front and rear axles	MODEL 172, 204, 207, 212, 218	AR40.30-P-0402CW
3		MODEL 217, 222, 231 These measurements determine whether it is necessary to replace chassis components or repair the body on the straightening bench. If there is visible damage (e.g. crack formation or deformation) on the front axle or rear axle carrier, these parts must be replaced.	AR40.30-P-0402RK
4	Repair vehicle	Where damage has been detected.
5	Perform wheel alignment check	MODEL 231	AR40.20-P-0200R
		MODEL 172, 207, 212, 218	AR40.20-P-0200EW
		MODEL 217, 222	AR40.20-P-0200LF
		MODEL 204 After the vehicle has been repaired.	AR40.20-P-0200CW