Remove/install Keyless-Go antenna - AR82.62-P-8000EC

MODEL 207 with CODE (889) Keyless-Go 

Interior center console 

Fig 1: Identifying Keyless-Go Antenna Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Switch off ignition and remove transmitter key or KEYLESS-GO stop/start button from the EIS (EZS) control unit	KEYLESS-GO start/stop button only on vehicles with code (889) Keyless-Go.
2	Release control and operating unit for climate control and place to one side with attached electrical lines		AR83.25-P-1124EC
3	Disconnect electrical connector (1)
4	Remove screws (2) and remove Keyless-Go interior antenna (A2/61)
5	Install in the reverse order