Retrofit iPod interface with video function - AZ82.60-P-0017EC

MODEL 207.3##/4## 1# up to 5/31/12 up to model year 2013 with CODE 512 (COMAND APS with DVD changer) without CODE 088 (Control code NTG 4.5) without CODE 218 (Reversing camera) without CODE 498 (Japanese version) without CODE 518 (Media Interface) 

MODEL 207.3##/4## 1# up to 5/31/12 up to model year 2013 with CODE 527 (COMAND APS with single DVD drive (with navigation)) without CODE 088 (Control code NTG 4.5) without CODE 218 (Reversing camera) without CODE 498 (Japanese version) without CODE 518 (Media Interface) 

Fig 1: Identifying Ipod Interface And Connection

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove
1	Remove COMAND controller unit
			AR82.60-P-7502EW
2	Remove glove box
			AR68.10-P-1400EC
	Install
3	Install iPod wiring harness and iPod interface (2)		AZ82.60-P-0017-01EC
	Notes on avoiding damage to optical fibers during repair work		AH82.60-P-0001-05AK
		Rechargeable screwdriver, rechargeable drill
4	Install glove box
			AR68.10-P-1400EC
5	Install COMAND controller unit
			AR82.60-P-7502EW
6	Document retrofitted equipment via vehicle documentation (VeDoc)	Attach "iPod Interface with video function retrofitted as per AZ82.60-P-0017EC " note under field organization texts to design group 82.
7	Connect Star Diagnosis and select vehicle via the vehicle identification number (VIN)
			AD00.00-P-2000-04A
8	Enable video AUX function in COMAND controller unit via variant coding with XENTRY
9	Disconnect STAR DIAGNOSIS
			AD00.00-P-2000-04A
10	Connect iPod to iPod connection (1) and perform function check of system	Check functions in vehicle as per the iPod operating instructions.