(Check Condition Of Rear Axle And Rear Axle Ball Joints - AP35.20-P-3552FC)
Model 253.99
Show on model 253.992
Show on model 253.992
Show on model 253.992
| Risk of injury . Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | AS00.00-Z-0009-01A | |
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Risk of explosion caused by escaping hydrogen or overheating of the fuel tanks when working on the hydrogen system. Risk of frostbite to body parts caused by escaping gas and by touching component parts carrying gas when emptying fuel tanks. Risk of asphyxiation caused by inhalation of air diluted by hydrogen. Risk of burn injuries by coming into contact with an invisible pale blue hydrogen flame. | AS00.00-Z-0030-01B | ||
| Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | AS00.00-Z-0035-01A | |
| Notes on fuel cell system | AH00.00-P-0022-01RFW | ||
| General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | AH00.00-Z-0300-01A | ||
| Preparatory activity | |||
| 1 | Release parking brake. | ||
| 2 | Lift vehicle with lifting platform. | ||
| AR00.60-P-1002LWG | |||
| Check | |||
| 3 | Assess the wheel bearings by firmly tugging, pushing and turning at the wheels. | If problems occur, ↓ rectify the problems. |
|
| 4 | Check side strut rods (1) for cracks, deformation and corrosion. | If problems occur, ↓ rectify the problems. |
|
| 5 | Check side strut rod elastomer bearings (2) for cracks, deformation and wear as well as for play by firmly pulling and pushing. | Swiveling inspection mirror with lighting, comparable to inspection mirror Hazet 1977 -1 If problems occur, ↓ rectify the problems. |
|
| 6 | Check upper strut rods (3) for cracks, deformation and corrosion. | If problems occur, ↓ rectify the problems. |
|
| 7 | Check upper strut rod elastomer bearings (4) for cracks, deformation and wear as well as for play by firmly pulling and pressing. | Swiveling inspection mirror with lighting, comparable to inspection mirror Hazet 1977 - 1 If problems occur, ↓ rectify the problems. |
|
| 8 | Check stabilizer bar (6) for cracks, deformation and corrosion. | If problems occur, ↓ rectify the problems. |
|
| 9 | Check stabilizer bar bushings (6a) for cracks, deformation and wear as well as for play by firmly pulling and pressing. | Swiveling inspection mirror with lighting, comparable to inspection mirror Hazet 1977 -1 If problems occur, ↓ rectify the problems. |
|
| 10 | Check shift rails (13) for cracks, deformation and corrosion. | If problems occur, ↓ rectify the problems. |
|
| 11 | Check shift rail elastomer bearings (14) for cracks, deformation and wear as well as for play by firmly pulling and pressing. | Swiveling inspection mirror with lighting, comparable to inspection mirror Hazet 1977 -1 If problems occur, ↓ rectify the problems. |
|
| 12 | Check spring links (10) for cracks, deformation and corrosion. | If problems occur, ↓ rectify the problems. |
|
| 13 | Check spring link elastomer bearings (11) for cracks, deformation and wear as well as for play by firmly pulling and pushing. | Swiveling inspection mirror with lighting, comparable to inspection mirror Hazet 1977 -1 If problems occur, ↓ rectify the problems. |
|
| 14 | Check supporting links (20) for cracks, deformation and corrosion. | If problems occur, ↓ rectify the problems. |
|
| 15 | Check supporting link elastomer bearings (20a) for cracks, deformation and wear as well as for play by firmly pulling and pressing. | Swiveling inspection mirror with lighting, comparable to inspection mirror Hazet 1977 -1 If problems occur, ↓ rectify the problems. |
|
| 16 | Check control arms (15) for cracks, deformation and corrosion. | If problems occur, ↓ rectify the problems. |
|
| 17 | Check control arm elastomer bearings (16) for cracks, deformation and wear as well as for play by firmly pulling and pressing. | Swiveling inspection mirror with lighting, comparable to inspection mirror Hazet 1977 -1 If problems occur, ↓ rectify the problems. |
|
| 18 | Check rear axle (12) for cracks, deformation and corrosion. | If problems occur, ↓ rectify the problems. |
|
| 19 | Check rear axle carrier elastomer bearings (8) for cracks, deformation and wear. | Swiveling inspection mirror with lighting, comparable to inspection mirror Hazet 1977 -1 If problems occur, ↓ rectify the problems. |
|
| 20 | Check electric drive unit elastomer bearings (5) for cracks, deformation and wear as well as for play by firmly pulling and pressing. | Swiveling inspection mirror with lighting, comparable to inspection mirror Hazet 1977 - If problems occur, ↓ rectify the problems. |
|
| 21 | Check cross strut (9) for cracks, deformation and corrosion. | ||
| 22 | Check condition of rear axle shafts (7). | If problems occur, ↓ rectify the problems. |
|
| 23 | Check outer drive shaft boots (18) for condition, leak tightness and correct seating. | Swiveling inspection mirror with lighting, comparable to inspection mirror Hazet 1977 -1 If problems occur, ↓ rectify the problems. |
|
| 24 | Check inner drive shaft boots (19) for condition, leak tightness and correct seating. | Swiveling inspection mirror with lighting, comparable to inspection mirror Hazet 1977 -1 If problems occur, ↓ rectify the problems. |
|
| 25 | Check condition and seating of clamps (17). | If problems occur, ↓ rectify the problems. |
|
| Finishing activity | |||
| 26 | Lower vehicle with vehicle lift. | ||
| AR00.60-P-1002LWG |