(Remove/Install Rear Shelf - AR68.30-P-4581LWV)

Model 213.1 

Courtesy of MERCEDES-BENZ USA

Shown with code 540 (Electric roller sun blind for rear window) 

Courtesy of MERCEDES-BENZ USA

Shown with code 540 (Electric roller sun blind for rear window) 

	Remove/install
1	Remove armrest		AR91.12-P-1744LWV
2	Remove left and right C-pillar trim	It is not necessary to remove the outer C-pillar trims and the belt end fittings.	AR68.30-P-4491LWV
3	Unhook cover (2) upward from bracket (3) and remove	: Ensure that the guide (2.1) is seated securely in the opening (arrow A).
4	Unscrew bolt (4)	: Observe installation position of belt end fitting as well as seat belt buckle.
		Bolt, rear belt end fitting	*BA91.40-P-1005-01U
5	Remove cover (5)
6	Loosen screw/bolts (6)	Model 213.1 with code 540 (Electric sunblind for rear window)
7	Unlock catch hook (7) and press rear shelf (1) toward front
8	Slightly lift rear shelf (1), pull out toward front and lay down in rear	Carefully pull out rear shelf (1). The surrounding assembly parts can get damaged otherwise. : Ensure that the retaining clips (13) arrest properly in the eyelets (9).
9	Guide seat belt through opening in rear shelf (1)
10	Disconnect electrical connectors (8)	The number varies according to vehicle equipment.
11	Remove rear shelf (1).
12	Remove additional brake lamp (12)	When replacing rear shelf (1).
			AR82.10-P-5376LW
13	Remove roller sun blind (11)	Model 213.1 with code 540 (Electric sunblind for rear window) When replacing rear shelf (1).
			AR68.50-P-3400LWV
14	Remove speaker	Model 213.1 with code 810 (Sound system) Model 213.1 with code 811 (Advanced sound system) When replacing rear shelf (1).
15	Install in the reverse order