Remove/Install Rear Shelf - AR68.30-P-4581CLW
Model 205.3
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Notes on sensor system for trunk lid opening/closing | AH80.61-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove right and left C-pillar paneling (2) | AR68.30-P-4490CLW | |
| 2 | Remove spacers (3) | Fig 1 | |
| 3 | Disconnect electrical connectors (4) | ||
| 4 | Remove electrical lines (5) from body | ||
| 5 | Unscrew bolt (8) from towing eye bracket (9) and remove towing eye bracket (9) | ||
| 6 | Unlock catches (10) on rear shelf (1) and slightly push rear shelf (1) toward front | ||
| 7 | Remove rear shelf (1). | ||
| 8 | Remove sheet metal clip (6) from body (7) | ||
| 9 | Install in the reverse order |