 |
Information on preventing damage to electronic components due to electrostatic discharge |
|
AH54.00-P-0001-01A |
 |
Remove |
|
|
| 1 |
Move front passenger seat toward rear |
|
|
| 2 |
Disconnect battery ground line |
|
|
 |
|
|
AR54.10-P-0003NKB |
| 3 |
Remove radio |
|
|
|
|
|
AR82.60-P-7502NKB |
| |
|
The removed radio is no longer required. |
|
| 4 |
Remove 14.7 cm Audio/COMAND display (A40/8) |
|
|
|
|
|
AR82.60-P-7722NKB |
| |
|
The 14.7 cm Audio/COMAND display (A40/8) is no longer required. |
|
| 5 |
Remove instrument cluster |
|
|
|
|
|
AR54.30-P-6015NKB |
| 6 |
Remove glove compartment |
|
|
|
|
|
AR68.10-P-1400NKB |
 |
Install |
|
|
| 7 |
Retrofit antenna for global positioning system (GPS) |
MODEL 246.2 with CODE 505 (Radio 20 NTG5 non-navigation-capable), MODEL 246.2 with CODE 520 (Audio 20 USB) |
|
| |
AN82.61-P-7474-04NKD |
| Self-adhesive Velcro fastener |
*BR00.45-Z-1084-02A |
| 8 |
Retrofit WLAN antenna for COMAND |
|
AN82.85-P-0005-05NKD |
| 9 |
Retrofit COMAND fan motor (M4/13) |
|
AN82.85-P-0005-01NKB |
| 10 |
Retrofit electrical wiring harness for COMAND fan motor |
|
AN82.85-P-0005-02NKD |
Right footwell A-pillar ground point |
*BA00.19-P-1020-01B |
| 11 |
Install 17.8 cm Audio/COMAND display (A40/8) |
|
|
|
|
|
AR82.60-P-7722NKB |
| 12 |
Install remaining parts |
|
|
| |
Update Vehicle Documentation (VeDoc) |
|
|
| 13 |
Delete special equipment in online vehicle data card |
MODEL 246.2 with CODE 505 (Radio 20 NTG5 non-navigation-capable)
CODE 505 (Radio 20 NTG5 non-navigation-capable) |
|
| 14 |
Delete special equipment in online vehicle data card |
MODEL 246.2 with CODE 520 (Audio 20 USB)
CODE 520 (Audio 20 USB) |
|
| 15 |
Delete special equipment in online vehicle data card |
MODEL 246.2 with CODE 522 (Audio 20 CD including preinstallation for Garmin® MAP PILOT)
CODE 522 (Audio 20 CD including preinstallation for Garmin® MAP PILOT) |
|
| 16 |
Enter special equipment in online vehicle data card |
Code 531 (COMAND APS) CODE 814 (DVD changer) |
|
| 17 |
Attach note "COMAND Online with DVD changer retrofitted as per AN82.85-P-0008NKD " under field organization texts to design group 82 |
|
|
| 18 |
Connect diagnostic system and select vehicle via the vehicle identification number (VIN) |
|
|
|
|
|
AD00.00-P-2000-04A |
| 19 |
Carry out variant coding using software calibration number (SCN) |
"Instrument cluster" "Head unit" |
|
| 20 |
Carry out variant coding using software calibration number (SCN) |
MODEL 246.2 with CODE 218 (Reversing camera)
"Reversing camera control unit" |
|
| 21 |
Carry out variant coding using software calibration number (SCN) |
MODEL 246.2 with CODE 350 (E-Call Europe emergency call system), MODEL 246.2 with CODE B54 (Live Traffic Information)
"Communications module" |
|
| 22 |
Disconnect diagnostic system |
|
|
|
|
|
AD00.00-P-2000-04A |