Remove/install passenger airbag unit - AR91.60-P-0680RK
MODEL 231
Shown with removed instrument panel
| Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical components to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such components. |
AS91.00-Z-0008-01A | |
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Remove/install | |||
| 1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
| 2 | Disconnect battery ground line | AR54.10-P-0003RK | |
| 3 | Remove glove box | AR68.10-P-1400RK | |
| 4 | Remove paneling on passenger-side A-pillar | AR68.30-P-4050RK | |
| 5 | Remove bolts (1) | ||
| 6 | Remove cover (6) | Figure | |
| 7 | Remove screw (5) | ||
| 8 | Release and disconnect electrical connection (2) | ||
| 9 | Unscrew bolt (4) | *BA91.60-P-1002-01M | |
| 10 | Unscrew nuts (8) | *BA91.60-P-1001-01M | |
| 11 | Lift up instrument panel (7) slightly with assistant | Lift instrument panel (7) only far enough to gain access to the front passenger airbag (3). Otherwise, the instrument panel (7) may be damaged. |
|
| 12 | Remove front passenger airbag (3) | ||
| 13 | Install in the reverse order | ||
| Check | |||
| 14 | Check and erase vehicle fault memory using diagnostic system | When replacing the front passenger airbag (3). | |
| AD00.00-P-2000-04A |
AIRBAG
| Number | Designation | Model 231 | |
|---|---|---|---|
| BA91.60-P-1001-01M | Nut, front passenger airbag unit to instrument panel | Nm | 6 |
AIRBAG
| Number | Designation | Model 231 | |
|---|---|---|---|
| BA91.60-P-1002-01M | Screw/bolt, front passenger airbag unit to crossmember | Nm | 4 |