Remove/install air outlet temperature sensor, left side air vent - AR83.30-P-8081RK

MODEL 231 

Fig 1: Left Side Air Vent Outlet Temperature Sensor Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Switch off ignition and remove transmitter key (A8/1) or KEYLESS-GO start/stop button (S2/3) from electronic ignition lock control unit (N73)	KEYLESS-GO start/stop button (S2/3) only with CODE 889 (KEYLESS-GO).
2	Remove lower section of dashboard on driver side		AR68.10-P-1505RK
3	Disconnect electrical connector from air outlet temperature sensor for left side air vent (B10/31)
4	Turn air outlet temperature sensor for left side air vent (B10/31) 90° in clockwise direction (arrow) and pull out of air vent (1)
5	Install in the reverse order