Remove/install 360° front camera - AR54.30-P-3001LF
MODEL 222 with CODE 501 (360° camera)
MODIFICATION NOTES
| 21.8.15 | Commissioning of front 360° camera using diagnostic system added. | Operation step 6 |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove radiator grille | AR88.40-P-4001LF | |
| 2 | Open camera cover flap (1) and push retaining clip (2) out (arrow) | ||
| 3 | Unclip electrical wiring harness (3) | ||
| 4 | Pull front 360° camera (B84/9) out of radiator trim | ||
| 5 | Install in the reverse order | ||
| 6 | Commission front 360° camera (B84/9) using diagnostic system | If the front 360° camera (B84/9) was replaced. | |
| AD00.00-P-2000-04B | |||
| 7 | Calibrate front 360° camera (B84/9) using diagnostic system | ||
| AD00.00-P-2000-04B |