Tightening Torque For Threaded Connection On Longitudinal Member Front Section Changed Service Information - Si62.20-S-0007A

Model 447, 448 

Courtesy of MERCEDES-BENZ USA

Please remember that the tightening torque for screws/bolts of longitudinal member front section (1) at the front longitudinal member has been changed.

The tightening torque has been reduced from 120 Nm to 63 Nm. The modified tightening torque is to be incorporated into the relevant document AR62.20-S-1260E  and recorded in the WIS.

With immediate effect, the screws/bolts of longitudinal member front section (1) at the front longitudinal member must be tightened to the updated tightening torque.