Bleed Differential Lock Hydraulic System - AR33.40-P-0701GW
Model 463
as of model year 2013 up to model year 2019
| 1 | Open engine hood and raise to vertical position | Opening engine hood, moving to upright position and closing | AR88.40-P-1000GG |
| Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | AS42.50-Z-0001-01A | |
| 2 | Connect brake fluid changer to expansion reservoir (3) | ||
| Brake fluid notes | AH42.50-P-0001-01A | ||
| Brake fluids (DOT 4 plus) | BB00.40-P-0331-00A | ||
| 3 | Lift/jack up vehicle | Lift/jack up vehicle Model 463 as of model year 2013 up to model year 2019 |
AR00.60-P-1000G |
| 4.1 | Open bleed screw on front axle shift cylinder (1) | To bleed the front differential lock, allow approx. 80 cm3 of brake fluid to flow out free of bubbles. | |
| 4.2 | Open bleed screw on rear axle shift cylinder (2) | To bleed the rear differential lock, allow approx. 80 cm3 of brake fluid to flow out free of bubbles. | |
| 5.1 | Close bleed screw on front axle shift cylinder (1) | on front axle. |
*BA33.40-P-1005-01A |
| 5.2 | Close bleed screw on rear axle shift cylinder (2) | On rear axle. |
*BA35.40-P-1006-01A |
| 6 | Lower vehicle | Lift/jack up vehicle Model 463 as of model year 2013 up to model year 2019 |
AR00.60-P-1000G |
| 7 | Disconnect brake fluid changer | ||
| 8 | Check brake fluid level in expansion reservoir (3), correct if necessary | ||
| Brake fluid notes | AH42.50-P-0001-01A | ||
| Brake fluids (DOT 4 plus) | BB00.40-P-0331-00A |
DIFFERENTIAL LOCK SHIFT CYLINDER
| Number | Designation | Model 463 up to model year 2019 | |
|---|---|---|---|
| BA33.40-P-1005-01A | Bleed screw to differential lock cylinder | Nm | 14 |
DIFFERENTIAL LOCK SHIFT CYLINDER
| Number | Designation | Model 460, 461 Model 463 up to model year 2019 | |
|---|---|---|---|
| BA35.40-P-1006-01A | Bleed screw to differential lock cylinder | Nm | 14 |