Taxi/rental vehicle, function - GF82.25-P-0019FL

MODEL 212 with CODE 965 (Electrical preinstallation, rental vehicles) 

Fig 1: Taxi/Rental Vehicle Function Diagram - Model 212

Courtesy of MERCEDES-BENZ USA

Function requirements, general 

• Circuit 30 ON

Taxi/rental vehicle function, general 

The taxi/rental vehicle base function contains the special-purpose vehicle multifunction control unit to control and monitor various functions, the taxi two-way radio speaker and a specific vehicle wiring harness that enables the following equipment to be integrated:

• Taxi emergency alarm system radio remote triggering transmitter (with code (934) Taxi emergency alarm system)
• Taxi emergency alarm system "Delete" button (with code (934) Taxi emergency alarm system)
• Taxi emergency alarm system "Trigger" button (with code (934) Taxi emergency alarm system)
• Two-way radio (accessory)
• Radio data transceiver (accessories)
• Taximeter (with code (336) Preinstallation for taximeter installation)
• Mirror taximeter (with code (337) Taximeter integrated into rearview mirror)
• Roof sign lamp (with code (342) Roof sign connection for taxi)
• Two-way radio connection switch (with code (938) Preinstallation for hands-free two-way radio)

The individual functions are enabled using the diagnostic tester.

The taxi/rental vehicle function consists of the following subfunctions, which are described in separate documents:

• Emergency alarm, function (with code (934) Taxi emergency alarm system) 
• Mirror taximeter/mirror odometer, function (with code (337) Taximeter integrated into rearview mirror) 
• Two-way radio hands-free system function (with code (938) Preinstallation for hands-free two-way radio) 
• Two-way radio integration, function (with code (941) Preinstallation for radio data transmission)