Check and replace rubber boot - AR46.40-P-0400LW
MODEL 205
MODEL 253
Shown on model 205, left side of vehicle
| Check | |||
| 1 | Raise vehicle | AR00.60-P-1002LWG | |
| 2 | Stretch boots (1) by turning steering to maximum steering angle and check for damage (cracks, holes, chafe marks and intrusions) | Do not check the boots (1) by pressing in or around the raised beads. Otherwise damage and leakages may occur. If damage is present: ↓ Replace the boots (1). |
|
| AR46.40-P-9998LW | |||
| 3 | Lower vehicle | AR00.60-P-1002LWG |