Table of contents for function description of gasoline injection and ignition system with direct injection - GF07.70-P-0998MNA
ENGINE 177.9 in MODEL 205
| Gasoline injection and ignition system with direct injection, function | GF07.70-P-0002MNA | ||
| Ignition ON, function | GF07.10-P-1000MNA | ||
| Starting, function | GF07.10-P-1001MNA | ||
| Ignition OFF, function | GF07.10-P-1002MNA | ||
| Fuel supply, function | GF07.10-P-1003MNA | ||
| Injection regulation, function | GF07.10-P-1004MNA | ||
| Ignition system function | GF07.10-P-1005MNA | ||
| Synchronize fuel injection and firing order function | GF07.10-P-1006MNA | ||
| Start, post-start phase and warm-up enrichment, function | GF07.10-P-1007MNA | ||
| Rpm control, function | GF07.10-P-1008MNA | ||
| Alternator interface function | GF07.10-P-1009MNA | ||
| Lambda control, function | GF07.10-P-1010MNA | ||
| Smooth running control, function | GF07.10-P-1011MNA | ||
| Thermal management, function | GF07.10-P-1012MNA | ||
| Torque coordination, function | GF07.10-P-1013MNA | ||
| Deceleration fuel shutoff, function | GF07.10-P-1014MNA | ||
| Knock control, function | GF07.10-P-1015MNA | ||
| Camshaft adjustment, function | GF07.10-P-1016MNA | ||
| Engine limp-home mode, function | GF07.10-P-1019MNA | ||
| On-board diagnosis, function | GF07.10-P-1020MNA | ||
| Engine timing start-stop function | GF07.10-P-1041MNA | ||
| Charging, function | GF09.00-P-2000MNA | ||
| Exhaust treatment function | GF14.00-P-3000MNA | ||
| Electronic accelerator function | GF30.20-P-3015MNA | ||
| On-board refueling vapor recovery function | Engine 177.9 in model 205 with code 494 (US version) |
GF47.10-P-3004MNA | |
| Purging function | GF47.30-P-3015MNA | ||
| Purging system with leak test function | Engine 177.9 in model 205 with code 494 (US version) |
GF47.30-P-3016MNA | |
| Overview of system components for gasoline injection and ignition system with direct injection | GF07.70-P-9998MNA |