Remove/install contact plate for cell phone holder (UPCI (UHI)) in the armrest - AR82.70-P-8919LW

MODEL 205, 253 with CODE 386 (Comfort telephony) 

Fig 1: Cell Phone Holder Contact Plate UPCI (UHI) In Armrest Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Remove rear center console covering (1)		AR68.20-P-2358LW
2	Disconnect electrical connectors (4, 5)
3	Unhook electrical lines (3) at center console (2)
4	Remove bolt (6)
5	Remove cover (7) with mobile phone contact plate (X237/1) from center console (2)	In the process, pull electrical lines (3) out of center console (2).
6	Unhook electrical lines (3) at cover (7)
7	Unscrew bolt (8)
8	Remove mobile phone contact plate (X237/1) from cover (7)
9	Install in the reverse order