LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2016 >> C63 AMG >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Electrical System - Body - 205 Chassis - 2 Of 2 >> Retrofitting & Conversion >> Retrofit COMAND Online incl. DVD changer >> Retrofit COMAND Online incl. DVD changer - AN82.85-P-0008LWC

Retrofit COMAND Online incl. DVD changer - AN82.85-P-0008LWC

MODEL 205.3 

with CODE 355 (Preinstallation for retrofitting navigation system) 

with CODE 3U1 (Head unit ECE/ROW) 

except CODE 531 (COMAND APS) 

MODEL 205.3 

with CODE 357 (Map navigation) 

with CODE 3U1 (Head unit ECE/ROW) 

except CODE 531 (COMAND APS) 

MODEL 205.3 

with CODE 3U1 (Head unit ECE/ROW) 

with CODE 520 (Audio 20 USB) 

except CODE 531 (COMAND APS) 

MODEL 205.3 

with CODE 3U1 (Head unit ECE/ROW) 

with CODE 522 (Audio 20 radio) 

except CODE 531 (COMAND APS) 

Fig 1: Head Unit And Audio/COMAND Display
G11138829Courtesy of MERCEDES-BENZ USA
Fig 2: Right Footwell Footrest And Air Duct In Right Footwell
G11138830Courtesy of MERCEDES-BENZ USA
REMOVING Remove     
1 Remove head unit (A26/17) Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 520 (Audio 20 USB)
except code 531 (COMAND APS)
Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 522 (Audio 20 radio)
except code 531 (COMAND APS)
 
REFER TO TESTING & REPAIR   IMPORTANT The head unit (A26/17) is no longer required. AR82.85-P-1100LW
2 Remove upper control panel control unit    
REFER TO TESTING & REPAIR   IMPORTANT The upper control panel control unit is no longer required. AR54.21-P-1262LW
3 Remove 7-inch Audio/COMAND display (A40/8)    
REFER TO TESTING & REPAIR   IMPORTANT The 7 inch Audio/COMAND display (A40/8) is no longer required. AR82.60-P-7722LW
4 Remove USB electrical connectors (X115) in front stowage compartment Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 520 (Audio 20 USB)
except code 531 (COMAND APS)
Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 522 (Audio 20 radio)
except code 531 (COMAND APS)
 
REFER TO TESTING & REPAIR   IMPORTANT The USB electrical connectors (X115) are no longer required. AR82.60-P-1032LW
5 Remove instrument cluster Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 520 (Audio 20 USB)
except code 531 (COMAND APS)
Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 522 (Audio 20 radio)
except code 531 (COMAND APS)
 
REFER TO TESTING & REPAIR     AR54.30-P-6015LW
6 Remove glove compartment    
REFER TO TESTING & REPAIR     AR68.10-P-1400LW
7 Remove right front floor covering Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 520 (Audio 20 USB)
except code 531 (COMAND APS)
Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 522 (Audio 20 radio)
except code 531 (COMAND APS)
 
REFER TO TESTING & REPAIR     AR68.20-P-2070LW
8 Remove right footwell air duct (12)    
9 Remove right footwell footrest (13)    
INSTALLING Install     
10 Fabricate wiring harness for SD card navigation Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 520 (Audio 20 USB)
except code 531 (COMAND APS)
Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 522 (Audio 20 radio)
except code 531 (COMAND APS)
AN82.85-P-0007-05LW
    SPECIAL TOOL Wiring harness repair kit Figure
11 Retrofit wiring harness for SD card navigation Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 520 (Audio 20 USB)
except code 531 (COMAND APS)
Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 522 (Audio 20 radio)
except code 531 (COMAND APS)
AN82.85-P-0007-06LW
    TORQUE SPECIFICATION Nut, positive line to instrument panel fuse box *BA54.15-P-1005-01K 
    TORQUE SPECIFICATION Additional battery ground point *BA00.19-P-1021-01E 
12 Retrofit GPS antenna for SD card navigation Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 520 (Audio 20 USB)
except code 531 (COMAND APS)
Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 522 (Audio 20 radio)
except code 531 (COMAND APS)
AN82.61-P-7474-04LW
13 Install multimedia connection unit (A90/5) in front stowage compartment Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 520 (Audio 20 USB)
except code 531 (COMAND APS)
Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 522 (Audio 20 radio)
except code 531 (COMAND APS)
 
REFER TO TESTING & REPAIR     AR82.60-P-1032LW
14 Install WLAN antenna for COMAND   AN82.85-P-0005-05LW
15 Retrofit touchpad wiring harness Model 205.3 except code 448 (Touchpad with rotary pushbutton) AN82.60-P-0017-01LW
16 Retrofit CAN wiring harness Model 205.3 except code 448 (Touchpad with rotary pushbutton) AN82.60-P-0017-02LW
17 Retrofit touchpad Model 205.3 except code 448 (Touchpad with rotary pushbutton) AN82.60-P-0017-03LW
18 Install 8.4-inch Audio/COMAND display (A40/8)    
REFER TO TESTING & REPAIR     AR82.60-P-7722LW
19 Install new upper control panel control unit    
REFER TO TESTING & REPAIR     AR54.21-P-1262LW
20 Install COMAND Online with DVD player head unit (A26/17) Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 520 (Audio 20 USB)
except code 531 (COMAND APS)
Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 522 (Audio 20 radio)
except code 531 (COMAND APS)
 
REFER TO TESTING & REPAIR     AR82.85-P-1100LW
21 Install remaining parts    
  Update Vehicle Documentation (VeDoc)     
22 Delete special equipment in online vehicle data card IMPORTANT Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 520 (Audio 20 USB)
except code 531 (COMAND APS)
CODE 520 (Audio 20 USB)
IMPORTANT Model 205.3
with code 3U1 (Head unit ECE/ROW)
with code 522 (Audio 20 radio)
except code 531 (COMAND APS)
Code 522 (Audio 20 radio)
IMPORTANT Model 205.3
with code 355 (Preinstallation for retrofitting navigation system)
with code 3U1 (Head unit ECE/ROW)
except code 531 (COMAND APS)
Code 355 (Preinstallation for navigation retrofit)
IMPORTANT Model 205.3
with code 357 (Map navigation)
with code 3U1 (Head unit ECE/ROW) except code 531 (COMAND APS)
Code 357 (Card navigation)
 
23 Enter special equipment in online vehicle data card IMPORTANT Code 531 (COMAND APS) and code 814 (DVD changer)  
24 Attach note "COMAND Online with DVD changer retrofitted as per AN82.85-P-0008LWC " under field organization texts to design group 82    
25 Connect diagnostic system and select vehicle via the vehicle identification number (VIN)    
REFER TO SELF-DIAGNOSTIC SYSTEMS     AD00.00-P-2000-04B
26 Carry out variant coding using software calibration number (SCN) IMPORTANT Electronic ignition lock control unit and head unit.  
27 Disconnect diagnostic system    
REFER TO SELF-DIAGNOSTIC SYSTEMS     AD00.00-P-2000-04B
INSPECT Check     
28 Perform function test IMPORTANT See Owner's Manual.  
GROUND POINTS

Number Designation Model 205
BA00.19-P-1021-01E Additional battery ground point W15/17 Nm 10
FUSE AND RELAY BOX

Number Designation Model 205
BA54.15-P-1005-01K Nut, positive line to instrument panel fuse box M6 Nm 8
M8 Nm 16
Fig 3: Identifying Wiring Harness Repair Kit (220 589 01 99 00)
G07501925Courtesy of MERCEDES-BENZ USA
PARTS ORDERING NOTE

Part no. Designation Quantity
KG 99 Parts kit for COMAND online incl. DVD changer 1
Commercially Cable shoe, ø 6 mm 1
Commercially Red electrical line, line cross-section 0.5 mm2 , length 2, 000 mm 1
Commercially Brown electrical line, line cross-section 0.5 mm2 , length 2, 000 mm 1