Remove/install multimedia connection unit in front stowage compartment - AR82.60-P-1032LW

MODEL 205, 253 

Fig 1: Front Stowage Compartment Multimedia Connection Unit Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove
1	Release center console cover (1) and lift at rear until electrical connector (2) is accessible	Model 205 with transmission 716 Model 253 with transmission 716	AR68.20-P-2350LWA
		Model 205 with transmission 722, 724, 725 Model 253 with transmission 724, 725	AR68.20-P-2350LW
2	Disconnect electrical connector (2)
3	Insert removal fixtures (3) in multimedia connection unit (A90/5) or USB electrical connectors (X115) and remove multimedia connection unit (A90/5) or USB electrical connectors (X115) from center console	Removal assembly	Fig 2
4	Operate locks (arrows) on multimedia connection unit (A90/5) or USB electrical connectors (X115) and pull out removal fixtures (3)
	Install
5	Insert multimedia connection unit (A90/5) or USB electrical connectors (X115) in center console	The multimedia connection unit (A90/5) and the USB electrical connectors (X115) must audibly engage.
6	Connect electrical connection (2)
7	Fasten center console cover (1)	Model 205 with transmission 722, 724, 725 Model 253 with transmission 724, 725	AR68.20-P-2350LW
		Model 205 with transmission 716 Model 253 with transmission 716	AR68.20-P-2350LWA

Fig 2: Identifying Removal Assembly (000 589 88 63 00)

Courtesy of MERCEDES-BENZ USA