Remove/install pyrofuse - AR54.10-P-1180LW
MODEL 205 with CODE ME04 (Mild hybrid drive)
MODEL 205 with CODE ME06 (Hybrid drive 50-KW variant (incl. plugin))
MODEL 253.354/954
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove cover below right dashboard | AR68.10-P-1520LW | |
| 2 | Disconnect ground line of on-board electrical system battery | AR54.10-P-0003LW | |
| 3 | Remove bolts (3) | ||
| 4 | Pull pyrotechnical separator (K88) downwards until the electrical connections (1, 2) are accessible | ||
| 5 | Disconnect electrical connector (1) | ||
| 6 | Disconnect electrical connector (2) | ||
| 7 | Remove pyrotechnical separating element (K88) | ||
| 8 | Install in the reverse order |