LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2015 >> Sprinter 3500 Van Cargo Extended, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electrical System, Equipment & Instructions - Safety Precautions, Testing & Repair - Model 906 >> Testing & Repair >> Check Condition Of Battery - Ar54.10-D-1129A

Check Condition Of Battery - Ar54.10-D-1129A

Model 906 

Shown on starter battery 

G10888014Courtesy of MERCEDES-BENZ USA
  Risk of death  when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. AS54.00-Z-0001-01A 
  Risk of fire  /risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning  caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death  due to voltage U >= 30 V AC and U >= 60 V DC. No fires, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. AS54.10-Z-0001-01A 
  General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system   AS54.10-Z-0001-02A 
  Notes on battery   AH54.10-P-0001-01A
REMOVINGINSTALLING Remove/install     
1 Remove battery (G1)   AR54.10-S-0005S
2 Remove the auxiliary battery  
  AR54.10-S-0007S
INSPECT Check     
3 Visual inspection for external leaks or damage Model 906
IMPORTANT The batteries (G1) and additional batteries must not be mixed up when installed. When replacing batteries (G1) or additional batteries use the correct capacities.
If leaky or damaged, replace battery (G1) or additional battery: ↓
Remove/install battery
 
Model 906
Remove/install additional battery
AR54.10-D-0005SD 
Model 906
with code E28 (Additional battery for retrofitted consumers)
AR54.10-D-0007SD 
MODEL 906 with CODE ZO1 (James Cook Compact camper) MODEL 906 with CODE ZO2 (James Cook Classic camper) AR54.10-S-0007JC 
4 Check fluid level of individual battery cells Not with gel battery.
IMPORTANT The battery cells are properly filled when the acid is level with the "MAX" marking or the max. mark (arrow).
If it is not possible to determine the acid level from outside the battery, the acid should be approx. 15 mm above the lead plates or level with the max. mark (arrow).
 
5 Correct fluid level of individual battery cells Not with gel battery.
NOTES Do not use a metal funnel to refill.
This can lead to a short circuit.
IMPORTANT Only use distilled water to top up the fluid and do not overfill the battery cells.
 
6 Check battery (G1) or additional battery Model 906  
REFER TO SPECIAL TOOLS 000 588 02 19 00 Battery tester   WS54.00-N-3006B
    Model 906 AR54.10-N-1129-01A 
    Battery capacity 46Ah *BE54.10-N-1001-01A 
    Battery capacity 60 Ah *BE54.10-N-1002-01A 
    Battery capacity 60 Ah (absorbent glass mat battery) *BE54.10-N-1003-01A 
    Battery capacity 62 Ah *BE54.10-N-1004-01A 
    Battery capacity 66 Ah *BE54.10-N-1005-01A 
    Battery capacity 70 Ah (absorbent glass mat battery) *BE54.10-N-1006-01A 
    Battery capacity 74 Ah *BE54.10-N-1007-01A 
    Battery capacity 84 Ah *BE54.10-N-1008-01A 
    Battery capacity 88 Ah *BE54.10-N-1009-01A 
    Battery capacity 90 Ah (absorbent glass mat battery) *BE54.10-N-1010-01A 
    Battery capacity 95 Ah (absorbent glass mat battery) *BE54.10-N-1011-01A 
    Battery capacity 100 Ah *BE54.10-N-1012-01A 
    Battery capacity 115 Ah *BE54.10-N-1013-01A 
    Battery capacity 125 Ah *BE54.10-N-1014-01A 
    Battery capacity 135 Ah *BE54.10-N-1015-01A 
    Battery capacity 165 Ah *BE54.10-N-1016-01A 
    Battery capacity 200 Ah *BE54.10-N-1017-01A 
    Battery capacity 220 Ah *BE54.10-N-1018-01A 
    Battery capacity 225 Ah *BE54.10-N-1019-01A 
7 Replace battery (G1) Model 906 If the battery (G1) is defective.  
Model 906 AR54.10-D-0005SD 
8 Replace additional battery Model 906
If the additional battery is defective.
 
Model 906
with code E28 (Additional battery for retrofitted consumers)
AR54.10-D-0007SD 
MODEL 906 with CODE ZO1 (James Cook Compact camper) MODEL 906 with CODE ZO2 (James Cook Classic camper) AR54.10-S-0007JC 
9 Fill in test sheet form    
10 Install in the reverse order    
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1001-01A Battery capacity 46Ah Cold cranking amps As per DIN A 250
As per EN A 420
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1002-01A Battery capacity 60 Ah Cold cranking amps As per DIN A 300
As per EN A 510
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1003-01A Battery capacity 60 Ah Cold cranking amps (absorbent glass mat battery) As per DIN A 400
As per EN A 680
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1004-01A Battery capacity 62 Ah Cold cranking amps As per DIN A 280
As per EN A 480
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1005-01A Battery capacity 66 Ah Battery test at 20 °C Acid density (battery charged) kg/dm 3 1, 28
Acid density during status test kg/dm 3 ≥1, 24
Permissible deviation of individual cells kg/dm 3 ≤0, 04
Cold cranking amps As per DIN A 300
As per EN A 510
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1006-01A Battery capacity 70 Ah (absorbent glass mat battery) Cold cranking amps As per DIN A 450
As per EN A 760
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1007-01A Battery capacity 74 Ah Battery test at 20 °C Acid density (battery charged) 3 kg/dm 1, 28
Acid density during status test kg/dm 3 ≥1, 24
Permissible deviation of individual cells kg/dm 3 ≤0, 04
Cold cranking amps As per DIN A 400
As per EN A 680
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1008-01A Battery capacity 84 Ah Cold test current As per DIN A 420
As per EN A 700
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1009-01A Battery capacity 88 Ah Battery test at 20 °C Acid density (battery charged) kg/dm 3 1, 28
Acid density during status test kg/dm 3 ≥1, 24
Permissible deviation of individual cells kg/dm 3 ≤0, 04
Cold cranking amps As per DIN A 400
As per EN A 680
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1010-01A Battery capacity 90 Ah (absorbent glass mat battery) Cold cranking amps As per DIN A 580
As per EN A 950
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1011-01A Battery capacity 95 Ah (absorbent glass mat battery) Cold cranking amps As per DIN A 520
As per EN A 850
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1012-01A Battery capacity 100 Ah Battery test at 20 °C Acid density (battery charged) kg/dm 3 1, 28
Acid density during status test kg/dm 3 ≥1, 24
Permissible deviation of individual cells kg/dm 3 ≤0, 04
Cold cranking amps As per DIN A 450
As per EN A 760
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1013-01A Battery capacity 115 Ah Cold cranking amps As per DIN A 380
As per EN A 640
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1014-01A Battery capacity 125 Ah Cold cranking amps As per DIN A 430
As per EN A 720
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1015-01A Battery capacity 135 Ah Cold cranking amps As per DIN A 420
As per EN A 680
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1016-01A Battery capacity 165 Ah Cold cranking amps As per DIN A 540
As per EN A 900
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1017-01A Battery capacity 200 Ah Cold cranking amps As per DIN A 630
As per EN A 1050
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1018-01A Battery capacity 220 Ah Cold cranking amps As per DIN A 600
As per EN A 1000
BATTERY/POWER SUPPLY TEST AND ADJUSTMENT VALUES

Number Designation Model all (Heavy transporter, Light transporter, TRUCK)
BE54.10-N-1019-01A Battery capacity 225 Ah Cold cranking amps As per DIN A 680
As per EN A 1150