Disassemble/assemble front bumper - AR88.20-P-2050W
MODEL 172.4
Shown with code (240) LED daytime running lamp and code (230) Exclusive parking assist
| Remove/install | |||
| 1 | Remove front bumper (1). | AR88.20-P-2000W | |
| 2 | Remove radiator grille (2) | AR88.40-P-4001W | |
| 3 | Disconnect electrical connector en (3, 5) on front parking system distance sensors (B8/1, B8/2, B8/5, B8/6) | On vehicles with code (230) Exclusive parking assist | |
| 4 | Unlock bracket (4, 6) on catch hooks (arrows) and remove front parking system distance sensors (B8/1, B8/2, B8/5, B8/6) from brackets (4, 6) | On vehicles with code (230) Exclusive parking assist |
|
| 5 | Remove towing eye gap (8) | ||
| 6 | Remove right telescopic nozzle cover (9) and left telescopic nozzle cover (11). | For vehicles with code (600) Headlamp cleaning system | |
| 7 | Remove left daytime running light (E1/3) and right daytime running light (E2/3) | On vehicles with code (240) LED daytime running lamp or code (236) Daytime running lamp in LED version | AR82.10-P-2300W |
| 8 | Remove left front fog lamp and right front fog lamp | On vehicles without code (240) LED daytime running lamp | AR82.10-P-5103W |
| 9 | Unclip left cover (12) and right cover (10) | ||
| 10 | Remove left front bumper pedestrian protection sensor (B151/1) and right front bumper pedestrian protection sensor (B151/3) | On vehicles with code (U60) Pedestrian protection | AR91.60-P-0950WA |
| 11 | Expose wiring harness (13) and remove | ||
| 12 | Install in the reverse order |