Remove/install paneling on B-pillar - AR68.30-P-4700LW

Model 205.0/1/2 

Model 253 

Fig 1: Identifying B-Pillar Paneling Remove/Install Components - Shown On Model 205.0

Courtesy of MERCEDES-BENZ USA

Shown on MODEL 205.0 

Fig 2: Identifying B-Pillar Paneling Remove/Install Components

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying B-Pillar Paneling Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Move front seat to end position toward front
2	Unclip front door sill (5) and rear door sill (4)	When removing bottom B-pillar paneling (2).
3	Remove cover (6)		AR91.10-P-1200LW
4	Remove belt end fitting (7)		AR91.40-P-1030-02A
5	Loosen edge guard (3) in area of upper B-pillar trim (1) and lower B-pillar trim (2)
6	Unclip upper B-pillar trim (1) from retaining tabs (8), move out of guides (9) downwards and remove from seatbelt	Mount (10) on upper B-pillar trim (1) must be positioned on bolt of belt guide bracket.
7	Unclip bottom B-pillar trim (2) and remove
8	Install in the reverse order