Remove/install passenger airbag unit - AR91.60-P-0680LW
Model 205
Shown on a left-hand drive vehicle
Fig 1: Identifying Passenger Airbag Unit Remove/Install Components - Shown On Left-Hand Drive Vehicle
| Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side facing up; do not expose to temperatures greater than 100°C. When working on these units, disconnect the power supply. | AS91.00-Z-0001-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on performing repair, body work and welding on vehicles with airbags and RTE units | AH91.00-P-0002-01M | ||
| Assessment of airbag and belt tensioner units in accident vehicles | AH91.00-P-0006-01B | ||
| Legal requirements on handling and storing airbags and emergency tensioning retractor units | AH91.00-P-0004-01A | ||
| Remove/install | |||
| 1 | Dashboard (1) removal | AR68.10-P-1000LW | |
| 2 | Unscrew nuts (2) | *BA91.60-P-1001-01O | |
| 3 | Remove front passenger airbag (3) | ||
| 4 | Dispose of removed front passenger airbag (3) properly | When replacing the front passenger airbag (3). | |
| 5 | Install in the reverse order | ||
| 6 | Connect diagnostic system and check supplemental restraint system (SRS) | When replacing the front passenger airbag (3). | |
| AD00.00-P-2000-04B |
AIRBAG
| Number | Designation | Model 205.0/1/2/3 | |
|---|---|---|---|
| BA91.60-P-1001-01O | Nut, front passenger airbag unit to instrument panel | Nm | 5 |