Check toe-out angle - AR40.20-P-0325LF

MODEL 217 

MODEL 222 

MODIFICATION NOTES

25.06.2013	Toe-out angle with inner wheel steered through 20°		BE40.20-P-1001-08R
31.05.2016	Track difference angle at 20 ° Impact of the inside wheel		BE40.20-P-1001-08V

	Check
1	Check toe at front axle and adjust if necessary		AR40.20-P-0200LF
2	Check toe-out angle	The steering geometry is checked by measuring the toe-out angle. This is the difference in the steer angle between the outside wheel and the inside wheel when the inside wheel is steered through 20°. If substantial deviations are found, the cause may be one of the following, assuming that the camber and caster settings are correct: Toe not adjusted with the rack-and-pinion steering in the straight-ahead position, resulting in tie rods of unequal length. Steering knuckle or tie rod bent. On vehicles involved in an accident: Excessive deviations in the front end (longitudinal frame member, frame cross member, wheel well and firewall, or on front axle carrier) which have a negative effect on the adjustment range for camber and caster can result in greater differences in the toe-out on turns between left and right. Model 222.004/032/057/061/082/104/123/132/157/161/162/163/165/961/982 except code 487 (Active Body Control (ABC)) Model 222.004/032/057/061/082/104/123/132/157/161/162/163/165/961/982 with code 487 (Active Body Control (ABC)) Model 222.033/067/085/133/167/184/967/984/985 Model 222.077/177/179 Model 222.176/182/185/976 with code Z07 (Top protection) Model 222.176/182/976 except code 487 (Active Body Control (ABC)) except code Z07 (Top protection) Model 222.176/182/976 with code 487 (Active Body Control (ABC)) except code Z07 (Top protection) Model 222.178 Model 222.185 except code Z07 (Top protection) Toe-out angle with inner wheel steered through 20° Model 217 (except 217.378)	*BE40.20-P-1001-08R
		Model 217.378 Toe-out angle with inner wheel steered through 20°	*BE40.20-P-1001-08V

CHECK VALUES FOR TOE-OUT ANGLE

Number	Designation		MODEL 222 except 4MATIC, except CODE 487/Z07	MODEL 222 with CODE 487
BE40.20-P-1001-08R	Toe-out angle with inner wheel steered through 20°	∠°	-1° 31' (±30')	-1° 31' (±30')

CHECK VALUES FOR TOE-OUT ANGLE

Number	Designation		MODEL 222 with 4MATIC	MODEL 222 with CODE Z07
BE40.20-P-1001-08R	Toe-out angle with inner wheel steered through 20°	∠°	-1° 31' (±30')	-1° 36' (±30')

CHECK VALUES FOR TOE-OUT ANGLE

Number	Designation		MODEL 222 AMG except 4MATIC	MODEL 222 AMG with 4MATIC
BE40.20-P-1001-08R	Toe-out angle with inner wheel steered through 20°	∠°	-1° 31' (±30')	-1° 12' (±30')

CHECK VALUES FOR TOE-OUT ANGLE

Number	Designation		Model 217 except AMG, AMG model 217.377/379/477/479	AMG model 217.378/478 except code 494
BE40.20-P-1001-08V	Toe-out angle with inner wheel steered through 20°	∠°	-1° 31' (±30')	-1° 6' (±30')

CHECK VALUES FOR TOE-OUT ANGLE

Number	Designation		AMG model 217.378/478 with code 494
BE40.20-P-1001-08V	Toe-out angle with inner wheel steered through 20°	∠°	-1° 4' (±30')