Suspension - 222 Chassis
- General Information
- Basic Knowledge
- Safety Precautions
- Testing & Repair
- Install/remove emergency buffer - AR32.00-P-1000SX
- Locate noises from the suspension - AR32.00-P-2000A
- Remove/install rear axle spring - AR32.20-P-0232LFS
- Remove/install stabilizer bar on front axle - AR32.20-P-0300LF
- Remove/install torsion bar on rear axle - AR32.20-P-0315LF
- Remove/install compressor - AR32.22-P-2001LF
- Remove/install bracket for compressor - AR32.22-P-2009LF
- Replace rubber mount for compressor - AR32.22-P-2011LF
- Remove/install air suspension valve unit - AR32.22-P-2015LF
- Remove/install AIRmatic central reservoir - AR32.22-P-2017LF
- Remove/install air suspension control unit - AR32.22-P-6000LF
- Check AIRmatic for leaks - AR32.22-P-8100LF
- Remove/install rear suspension strut
- Remove/install the suspension strut
- Remove/install front stabilizer bar link rod - AR32.35-P-3328LF
- Remove/install front axle valve body - AR32.50-P-0001LF
- Remove/install rear suspension valve body - AR32.50-P-0002LF
- Remove/install front suspension pressure reservoir - AR32.50-P-0010LF
- Remove/install rear axle pressure reservoir - AR32.50-P-0011LF
- Remove/install return pressure reservoir - AR32.50-P-0012LF
- Remove/install pulsation damper
- Remove/install oil cooler - AR32.50-P-0020LF
- Fill up and vent the Active-Body-Control (ABC) system - AR32.50-P-0021SX
- Remove/install hydraulic fluid reservoir (ABC) - AR32.50-P-0022LF
- Remove/install control unit (ABC) - AR32.50-P-0023LF
- Separate hydraulic lines (ABC) - AR32.50-P-0024SX
- Filter Active Body Control (ABC) hydraulic fluid - AR32.50-P-0025RK
- Remove/install Active Body Control hydraulic pump
- Test & Adjustment Values
- Maintenance
- Capacities & Specifications
- Torque Specifications
- Wiring Diagrams
- Special tools
- 000 589 12 28 00 Knife - WS32.00-N-3046D
- 352 589 02 37 00 Pliers - WS32.00-N-3047C
- 601 589 04 33 00 Puller - WS32.00-N-3074B
- 166 589 00 91 00 Adapter - WS32.00-P-0005B
- 222 589 00 31 00 Set of emergency buffers - WS32.00-P-0006B
- 204 589 02 43 00 Insertion tool - WS32.00-P-0012B
- 202 589 00 43 00 Extraction and insertion tool - WS32.00-P-0013B
- 126 589 12 63 00 Funnel - WS32.00-P-0016A
- 126 589 14 21 00 Tester - WS32.00-P-0017B
- 202 589 01 31 00 Tensioning device - WS32.00-P-0040B
- 202 589 13 63 00 Clamping plates - WS32.00-P-0042B
- 140 589 45 63 00 Test cable 80-pin - WS32.00-P-0049B
- 211 589 00 09 00 Socket wrench bit - WS32.00-P-0061B
- 001 589 00 03 00 Box wrench bit - WS32.00-P-0062B
- 230 589 01 33 00 Detaching tool - WS32.00-P-0069B
- 124 589 24 21 00 Pressure pump - WS32.00-P-0078B
- 221 589 01 33 00 Detaching tool - WS32.00-P-0084B
- 164 589 01 37 00 Pliers - WS32.00-P-0087B
- 216 589 00 34 00 Thrust piece - WS32.00-P-0088B
- 221 589 01 09 00 Insertion open end wrench - WS32.00-P-0089B