Remove/install rear axle brake disc - AR42.10-P-0240GW

MODEL 463 as of model year 2013/model refinement package 2012

Fig 1: Rear Axle Brake Disc Remove/Install Components

G10780766

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove brake caliper (5) with brake caliper carrier (7)		AR42.10-P-0080GW
2	Reset parking-brake brake shoes		AR42.20-P-0540GW
3	Remove locking bolt (12) and remove brake disk (11)	Always replace brake disks (11) in pairs. Apply light coating of grease to interference fit of brake disk (11). Replace locking bolt (12).
			*BA42.10-P-1001-06B
		Hot lubricating paste	*BR00.45-Z-1005-06A
4	Install in the reverse order
5	Adjust parking brake		AR42.20-P-0540GW
6	Hydraulic brake system - check fluid level, correct if necessary
	Checking
7	Check function and effectiveness of brake system

BRAKE DISCS, BRAKE COVER PLATE

Number	Designation		MODEL 463
BA42.10-P-1001-06B	Locking bolt, brake disk to wheel hub	Nm	25

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1005-06A	Paste, hot lubrication 1 kg, DB supply specification 6879.20	A 000 989 76 51