Remove/install COMAND display - AR82.85-P-7429GW

MODEL 463 as of model year 2013/model refinement package 2012 

Fig 1: COMAND Display Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Switch off ignition
2	Unclip covers of screws/bolts (1)
3	Remove bolt (1)
4	Disconnect optical fiber connector	Do not kink or stretch optical fiber. Install caps at optical fiber coupling and equipment connector: ↓ Cover fiber optic cable and device terminal.	AR82.95-P-0005-01A
	Notes on fiber optic cable		AH82.70-P-0001-02A
5	Disconnect electrical connector
6	Remove Audio/COMAND display (A40/8)
7	Install in the reverse order
8	Read out and erase the fault memory using Star Diagnosis		AD00.00-P-2000-04A