SCAN coding of control units - AR54.21-P-0015X

MODEL 117, 129.058/063/067/076, 156, 163, 164, 166, 168, 169, 170, 171, 176, 199, 203, 204, 205, 207, 208, 209, 210, 211, 212, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 240, 242, 245, 246, 251, 450, 452, 454, 461 

MODEL 463 up to model year 2013 

	Notes on programming control units		AH54.21-P-0001-03Z
	"Online Software Calibration Number" (SCN) coding
1	Connect diagnostic system and start "Xentry Diagnostics" (XD)
		MODEL 117, 129.058/063/067/076, 156, 163, 164, 166, 168, 169, 170, 171, 176, 199, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 231, 240, 242, 245, 246, 251, 461 MODEL 463 up to model year 2013	AD00.00-P-2000-04A
		MODEL 205, 217, 222	AD00.00-P-2000-04B
		MODEL 450.3/4	AD00.00-P-2000-04SM
		MODEL 452.3/4	AD00.00-P-2000-04RR
		MODEL 454.0 During the entire work procedure a sufficiently large voltage supply must be provided for the vehicle's on-board electrical system. Otherwise any undervoltage may damage the control units.	AD00.00-P-2000-04FF
2.1	Perform online SCN coding	With networked "Star Diagnosis" diagnostic system.
			AR54.21-P-0013-01X
2.2	Carry out offline SCN coding	With non-networked "Star Diagnosis" diagnostic system.
			AR54.21-P-0013-04X
3	Read out and erase fault memory
4	Disconnect diagnostic system
		MODEL 117, 129.058/063/067/076, 156, 163, 164, 166, 168, 169, 170, 171, 176, 199, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 231, 240, 242, 245, 246, 251, 461 MODEL 463 up to model year 2013	AD00.00-P-2000-04A
		MODEL 205, 217, 222	AD00.00-P-2000-04B
		MODEL 450.3/4	AD00.00-P-2000-04SM
		MODEL 452.3/4	AD00.00-P-2000-04RR
		MODEL 454.0	AD00.00-P-2000-04FF