Check track rod and drag link linkage for play, check rubber boots - AP46.00-P-4653V

MODEL 171, 172 

Fig 1: Inspecting Track Rod And Drag Link Linkage For Play

Courtesy of MERCEDES-BENZ USA

	Check
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
	Risk of injury  caused by moving parts that can pinch, crush or, in extreme cases, even sever extremities	No parts of the body or limbs should be within the operating range of the mechanism when moving components.	AS00.00-Z-0009-01A
1	Turn ignition key to "0" position
2	Hoist vehicle with lifting platform until wheels are free		AR00.60-P-1000V
	Check
3	Check tie rod ball joints (10a) of right and left tie rod (10)	Check tie rod ball joints (10a) for play by firmly pulling and pushing. Replace tie rod ball joints (10a) in event of play subject to separate repair order: ↓ Remove/install tie rod:
		Model 171 Model 172	AR46.40-P-0200V
4	Check rubber boots (10b) of right and left tie rod ball joint (10a)	Check rubber boots (10b) for leaktightness and condition. If necessary, replace tie rod ball joints (10a) subject to separate repair order:↓ Remove/install tie rod:
		Model 171 Model 172	AR46.40-P-0200V
5	Check left and right bellows (10c)	Do not check bellows (10c) by pressing in or around raised beads as this leads to damage to the plastic and thus to leaks. Stretch bellows (10c) by turning steering to left and right wheel lock; and check for cracks, indentations and chafing. If necessary, replace bellows (10a) subject to separate repair order: ↓ Replace bellows:
		Model 171 Model 172	AR46.40-P-0400V
6	Lower vehicle