Retrofit COMAND Online incl. DVD changer - AN82.85-P-0008ELX

MODEL 218.3/9 with CODE 357 (SD card navigation) without CODE 460 (Canada version) without CODE 494 (US version) without CODE 498 (Japanese version) without CODE 531 (COMAND APS) without CODE 830 (Vehicles for China, additional parts) 

MODEL 218.3/9 with CODE 505 (Radio 20 NTG5, not navigation-enabled) without CODE 460 (Canada version) without CODE 494 (US version) without CODE 498 (Japanese version) without CODE 531 (COMAND APS) without CODE 830 (Vehicles for China, additional parts) 

MODEL 218.3/9 with CODE 522 (Audio 20 CD including preinstallation for Garmin® MAP PILOT) without CODE 460 (Canada version) without CODE 494 (US version) without CODE 498 (Japanese version) without CODE 531 (COMAND APS) without CODE 830 (Vehicles for China, additional parts) 

Fig 1: Identifying Radio And Audio/COMAND Display

Courtesy of MERCEDES-BENZ USA

	Remove
1	Remove instrument cluster	With CODE 505 (Audio 20 CD) or with CODE 522 (Audio 20 CD including preinstallation for Garmin® MAP PILOT)
			AR54.30-P-6015EL
2	Remove glove compartment
			AR68.10-P-1400EL
3	Remove radio (A2)
			AR82.60-P-7502EW
		Radio (A2) is no longer required.
	Install
4	Install WLAN antenna		AN82.85-P-0005-05ELX
5	Install GPS antenna	With CODE 505 (Audio 20 CD) or with CODE 522 (Audio 20 CD including preinstallation for Garmin® MAP PILOT)
			AZ82.61-P-0003-02ELX
6	Install wiring harness of additional fan for COMAND Online		AN82.85-P-0009-02EL
7	Install additional fan air ducts for COMAND	Vehicles as of model year 2015	AN82.85-P-0005-03ELX
8	Install additional fan for COMAND Online		AN82.85-P-0009-01ELX
9	Install COMAND controller unit with DVD changer (A40/3)
			AR82.60-P-7502EW
10	Install instrument cluster	With CODE 505 (Audio 20 CD) or with CODE 522 (Audio 20 CD including preinstallation for Garmin® MAP PILOT)
			AR54.30-P-6015EL
11	Install glove compartment
			AR68.10-P-1400EL
12	Install remaining parts
	Update Vehicle Documentation (VeDoc)
13	Attach note "COMAND Online with DVD changer retrofitted as per AN82.85- P-0008ELX" under field organization texts to design group 82
14	Delete special equipment in online vehicle data card via Vehicle Documentation System (VeDoc)	Delete:  CODE 505 (Audio 20 CD) or CODE 522 (Audio 20 CD including preinstallation for Garmin® MAP PILOT) or CODE 357 (Garmin® MAP PILOT) (if available)
15	Enter special equipment in online vehicle data card via Vehicle Documentation System (VeDoc)	Enter:  CODE 531 (COMAND Online) CODE 814 (DVD changer)
16	Connect diagnostic system and select vehicle via the vehicle identification number (VIN)
			AD00.00-P-2000-04A
17	Perform variant coding of "COMAND Online incl. DVD changer", "Instrument cluster" and "Electronic ignition lock control unit" with XENTRY using Software Calibration Number (SCN)
18	Disconnect diagnostic system
			AD00.00-P-2000-04A
	Check
19	Perform function test	See operator's manual for COMAND Online with DVD changer.