LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2013 >> CL65 >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Tires & Wheels -- Retrofitting & Conversion -- E550 (211.090) - 1 Of 2) >> Retrofitting & Conversion >> Disk wheel changes, tire conversion and suspension changes - AN40.10-P-1050T

Disk wheel changes, tire conversion and suspension changes - AN40.10-P-1050T

WARNING: This page is about a different car, the 2009 Mercedes-Benz E550 and 2008 Mercedes-Benz E550. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 211.0/2 

Fig 1: View Of AMG Spoked Wheel Styling III
G07249118Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
IMPORTANT Notes on conversion to 17- or 18-inch tires Model 211 AH40.10-P-0008-01TB
  Conversion to 17 or 18 inch tires IMPORTANT The standard jounce buffers on the front axle must be replaced by new rubber stops.
IMPORTANT National legislation must be taken into account before converting to 17 or 18 inch tires.
 
  Disassemble/assemble suspension strut On model 211.0/2 except code 489 Airmatic (semi-active air suspension)
Rubber buffer:
  • With standard suspension
  • With code 485 Standard suspension instead of Avantgarde suspension
  • With code 494 California version
  • With code 482 Suspension with increased ground clearance

Part no.: A 211 326 026 8
Rubber buffer:
  • With code 954 Avantgarde up to model refinement package 06.2006

Part no.: A 211 323 024 4
AR32.25-P-1018TS
PARTS ORDERING NOTES

Part no. Designation Quantity
A 211 326 026 8 Rubber bumper for standard suspension  
A 211 323 024 4 Rubber bumper for Avantgarde