Remove/install door interior actuating mechanism on rear side door - AR72.12-P-2310SX

MODEL 221.0/1 

Fig 1: Identifying Door Interior Actuating Mechanism Remove/Install Components - Rear Side Door

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove door lining (1) on left and right rear door and lay with front side down on suitable subsurface.	Vehicles without code (Z07) Top protection	AR72.12-P-1010SX
		Vehicles with code (Z07) Top protection	AR72.12-P-1010SXS
2	Loosen bolts from trim strip on door lining (1) of rear door		AR72.12-P-1050SX
3	Remove left rear inner door handle illumination (E17/13) or right rear inner door handle illumination (E17/14)
4	Unscrew bolts (3, 4)
5	Remove left rear seat control switch group (S55/1) or right rear seat control switch group (S55/2)	Do not disconnect electrical connector (5).
6	Remove inside door opener (2) from door lining (1)
7	Install in the reverse order