Table of contents for function description of gasoline injection and ignition system with direct injection - GF07.70-P-0998MMC

ENGINES 157.980 in MODEL 216.374, 221.074/174

ENGINES 278.920 in MODEL 216.373/394

ENGINES 278.932 in MODEL 221.073/173/094/194

Gasoline injection and ignition system with direct injection, function		GF07.70-P-0002MMC
Ignition ON, function		GF07.10-P-1000MMC
Starting, function		GF07.10-P-1001MMC
Ignition OFF, function		GF07.10-P-1002MMC
Fuel supply, function		GF07.10-P-1003MMC
Injection regulation, function		GF07.10-P-1004MMC
Ignition system function		GF07.10-P-1005MMC
Synchronize fuel injection and firing order function		GF07.10-P-1006MMC
Start, post-start phase and warm-up enrichment, function		GF07.10-P-1007MMC
Rpm control, function		GF07.10-P-1008MMC
Alternator interface function		GF07.10-P-1009MMC
Lambda control, function		GF07.10-P-1010MMC
Smooth running control, function		GF07.10-P-1011MMC
Thermal management, function		GF07.10-P-1012MMC
Torque coordination, function		GF07.10-P-1013MMC
Deceleration fuel shutoff, function		GF07.10-P-1014MMC
Knock control, function		GF07.10-P-1015MMC
Camshaft adjustment, function		GF07.10-P-1016MMC
Engine limp-home mode, function		GF07.10-P-1019MMC
On-board diagnosis, function		GF07.10-P-1020MMC
Engine start-stop function	For code (B03) ECO Start-stop function	GF07.10-P-1040MMC
Charging, function		GF09.00-P-2000MMC
Exhaust treatment function		GF14.00-P-3000MMC
Electronic accelerator function		GF30.20-P-3015MMC
On-board refueling vapor recovery function	With code (494) USA version	GF47.10-P-3004MMC
Purging function		GF47.30-P-3015MMC
Purging system with leak test function	With code (494) USA version	GF47.30-P-3016MMC
Overview of system components for gasoline injection and ignition system with direct injection		GF07.70-P-9998MMB