Wiring diagram of Keyless-Go control module - PE80.61-U-2101SAA
MODEL 221 Control unit N69/5
| Wiring diagram of Keyless Go control module | PE80.61-U-2101-97SAA | |
| Notes on avoiding damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Use of electric wiring diagrams | OV00.01-U-1901-03SAA | |
| Search aid through all wiring diagram groups | OV00.01-U-1901SAA | |
| Abbreviations for wiring diagrams | OV00.01-U-1001-27A | |
| Abbreviations of signal and circuit designations for wiring diagrams | OV00.01-U-1001-28SAA | |
| Search aid through all electrical components | OV00.01-U-1909SAA | |
| Arrangement and assignment of the wiring and plug connectors | GF00.19-U-1000SAA | |
| Arrangement and assignment of ground points | GF00.19-U-2000SAA | |
| Arrangement and assignment of Z connector sleeves (solder splices in wiring harness) | GF00.19-U-3000SAA | |
| Survey of wiring diagrams covering all function groups | Further wiring diagrams | PE00.19-U-1100SAA |
| Fuse and relay box, as-built configuration | GF54.15-P-0800SX | |
| Repair wiring harness in accordance with specified repair method | The original wire color is visible again after the repaired wire section (length about 30 cm). |
AR00.19-P-0001A |