Remove/install loudspeakers in rear doors - AR82.62-P-7874SX

MODEL 221.0 

MODEL 221.1 except CODE (Z07) Top protection 

Shown on model 221.1 with code (810) Sound system 

Fig 1: Identifying Rear Doors Loudspeakers Remove/Install Components - Shown On Model 221.1

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove door lining from left or right rear door	Do not yet disconnect electrical connectors.	AR72.12-P-1010SX
2	Switch on ignition and close crank window	Switch off ignition after raising the crank window, disconnect connectors and remove door lining.
3	Detach left rear door speaker group (H4/3) or right rear door speaker group (H4/4) from door module (1) Pliers	Use 5 mm dia. bit. Completely remove rivet residues. Workshop press
4	Install in the reverse order