Remove/install telematics services communications module control unit - AR82.85-P-0020CYA
MODEL 204 with CODE B54 (COM module)
Fig 1: Identifying Telematics Services Communications Module Control Unit Remove/Install Components - Illustrated With Model 204.9
Illustrated with model 204.9
Shown on model 204.2
Fig 2: Identifying Telematics Services Communications Module Control Unit Remove/Install Components - Shown On Model 204.2
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Switch off ignition | ||
| 2.1 | Remove glove box (1) | ||
| MODEL 204.9 with CODE B54 (COM module) |
AR68.10-P-1200CY | ||
| 2.2 | Open left side paneling flap in trunk | MODEL 204.0/2/3 with CODE B54 (COM module) |
|
| 3 | Remove first aid kit | MODEL 204.0/3 with CODE B54 (COM module) |
|
| 4 | Unclip retaining clip (2) | MODEL 204.9 with CODE B54 (COM module) |
|
| 5 | Disconnect electrical connector (4) and USB connector (5) | MODEL 204.9 with CODE B54 (COM module) |
|
| 6 | Remove screw/bolt (3) and remove telematics services communications module control unit (N112/2) | MODEL 204.9 with CODE B54 (COM module) |
|
| 7 | Unscrew nuts (6), disconnect connectors and remove telematics services communications module control unit (N112/2) | MODEL 204.0/2/3 with CODE B54 (COM module) |
|
| 8 | Connect STAR DIAGNOSIS and read fault memory | ||
| AD00.00-P-2000-04A | |||
| 9 | Install in the reverse order |