LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2012 >> GL350 >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Electrical System - Body - 164 Chassis - 4 Of 8 >> Basic Knowledge >> Route guidance through voice output, function >> Route guidance through voice output, function - GF82.61-P-2011GQ

Route guidance through voice output, function - GF82.61-P-2011GQ

MODEL 164.1 with CODE (527) COMAND APS with single DVD drive (with navigation) except CODE (498) Japan version as of model year 09/YoM 08 model refinement package 

MODEL 164.1 with CODE (512) COMAND APS with DVD changer as of model year 09/YoM 08 model refinement package 

MODEL 164.8 with CODE (527) COMAND APS with single DVD drive (with navigation) except CODE (498) Japan version as of model year 09/YoM 08 

MODEL 164.8 with CODE (512) COMAND APS with DVD changer as of model year 09/YoM 08 

MODEL 251.0 with CODE (527) COMAND APS with single DVD drive (with navigation) except CODE (498) Japan version as of model year 09/YoM 08 

MODEL 251.0 with CODE (512) COMAND APS with DVD changer as of model year 09/YoM 08 

MODEL 251.1 with CODE (527) COMAND APS with single DVD drive (with navigation) except CODE (498) Japan version as of model year 09/YoM 08 

MODEL 251.1 with CODE (512) COMAND APS with DVD changer as of model year 09/YoM 08 

Function requirements 

General 

The route guidance through voice output function is an assistance function that assists the driver without distracting him from the traffic. The destination-oriented navigation of the navigation system is supported by voice outputs with the following information:

The following languages are available for voice output, except code (830) China version:

And the following languages are also available for vehicles except code (494) USA version:

Further voice outputs take place at the start of the route calculation, when an intermediate destination has been reached, or when the destination has been reached. On vehicles, except code (494) USA version, for dynamic route guidance additional voice messages are issued in response to route influences by traffic messages.

Operating instructions 

The route guidance via voice output function can be operated using the following components:

IMPORTANT During an active voice output the volume of the announcement can be adjusted by the following components:

Function sequence for route guidance through voice outputs 

The navigation processor of the COMAND operating, display and controller unit links word segments during voice output to form complete instructions or information and generates speech signals. If required, the voice signals are forwarded using audio signals via Media Oriented System Transport (MOST) to the amplifier for sound system (N40/3) (with code (810) Sound system), where they are amplified and output via direct lines over the following speakers:

IMPORTANT The voice signal for the subwoofer speaker (H4/29) travels from the COMAND operating, display and controller unit via MOST to the amplifier for sound system, and from there via direct lines to the subwoofer amplifier (N40/9) and then to the subwoofer speaker.

IMPORTANT In vehicles without code (810) Sound system, the voice signals are amplified in the COMAND operating, display and controller unit using audio signals and output via direct lines over the following speakers:

REFER TO SYSTEM WIRING DIAGRAMS Electrical function diagram for route guidance by voice output (COMAND), function Model 164 PE82.85-P-2061-97MAA
Model 251 PE82.85-P-2061-97RAA
  Instrument cluster, component description A1 GF54.30-P-6000GM
  COMAND operating, display and controller unit, component description A40/3 GF82.85-P-3134GQ
  Sound system amplifier, component description N40/3
With CODE (810) Sound system
GF82.62-P-6003GQS