LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2012 >> GL350 >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Electrical System - Body - 164 Chassis - 4 Of 8 >> Basic Knowledge >> Audio 50 APS audio functions - GF82.61-P-2007GZ

Audio 50 APS audio functions - GF82.61-P-2007GZ

MODEL 164 except CODE (494) USA version except CODE (498) Japan version with CODE (525) MB Audio 50 APS radio up to Model Year 2008 

Radio 

The roof antenna module (A2/93) filters the amplitude modulation (AM) and frequency modulation (FM) signals, amplifies them, and transmits them to the radio and navigation unit (A2/56). The signals are demodulated in the AM and FM radio receiver and the wanted signal is amplified and output over the vehicle speakers. With code (810) Sound system, the audio signals are digitized and transmitted from the radio and navigation unit via Media Oriented System Transport (MOST) to the amplifier for sound system (N40/3). There, the audio signals are processed, amplified and output over the vehicle speaker.

Radio functions 

Playing audio CDs 

The single-slot drive above the display of the radio and navigation unit and the CD changer (A2/6) (code (819) 6-disk CD changer) can play CD audio media (in Red Book audio format) and data CDs with MP3 files (max. 99 tracks). The following can be controlled with the menu:

With code (819) 6-disk CD changer, the radio and navigation unit automatically displays which CD slots contain a CD. In the process, the CD change slots are shown numbered consecutively accordingly (CD 1 to CD 6).

User guidance for controlling CD functionality and displaying supplemental information is done in the radio and navigation unit display. The most important information is displayed in the instrument cluster (A1).

The most important functions can also be controlled using the buttons on the multifunction steering wheel (left multifunction steering wheel button group, right multifunction steering wheel button group).

The voice control system (VCS [SBS]) with code (813) Voice control system (VCS [SBS]) and the associated audio functions are actuated at the MFL using the VCS [SBS] on button (S111s4) and the VCS [SBS] off button (S110s4). A signal tone is emitted after the voice control system has been activated. An external analog audio source can be connected to the radio and navigation unit via the AUX jack in the glove box. Data exchange via a discrete line.

The audio signals are transmitted digitally from the radio and navigation unit to the amplifier for sound system with code (810) Sound system via MOST, amplified, and output over the speakers installed in the vehicle.

On vehicles except code (810) Sound system, the audio signals are amplified by the radio and navigation unit and output directly over the speakers installed in the vehicle.

In addition to playing audio media, the drive of the radio and navigation unit is also used for reading out the navigation data media.

  Audio 50 APS component description   GF82.61-P-4099GZ 
  Sound amplifier, component description with CODE (810) Sound system GF82.62-P-3009GZ
  Speaker system, component description with CODE (810) Sound system GF82.62-P-4220GZE
  CD player with changer component description With code (819) 6-disk CD changer GF82.64-P-3112GZ