LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2012 >> GL350 >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Electrical System - Body - 164 Chassis - 2 Of 8 >> Basic Knowledge >> Navigation mode, function >> Navigation mode, function - GF82.85-P-2012GQA

Navigation mode, function - GF82.85-P-2012GQA

MODEL 164.1 with CODE (525) MB Audio 50 APS radio as of model year 09/YoM 08 model refinement package 

MODEL 164.1 with CODE (511) Audio 50 APS with DVD changer as of model year 09/YoM 08 model refinement package 

MODEL 164.8 with CODE (525) MB Audio 50 APS radio as of model year 09/YoM 08 

MODEL 164.8 with CODE (511) Audio 50 APS with DVD changer as of model year 09/YoM 08 

MODEL 251.0 with CODE (525) MB Audio 50 APS radio as of model year 09/YoM 08 

MODEL 251.0 with CODE (511) Audio 50 APS with DVD changer as of model year 09/YoM 08 

MODEL 251.1 with CODE (525) MB Audio 50 APS radio as of model year 09/YoM 08 

MODEL 251.1 with CODE (511) Audio 50 APS with DVD changer as of model year 09/YoM 08 

Function requirements for navigation mode 

GENERAL INFORMATION 

The location of the vehicle, as well as the direction and distance to the destination are determined with the aid of the navigation system after entering the following information:

After the destination and street have been entered, the following computer models can be selected:

In addition, other route options can be selected:

The "Special Destinations" menu is supplemented by the "Bypassing current location", "Bypassing other Locations" and "National Destinations" submenus. POI categories are, e.g.:

After entering or calling a destination location, route calculation starts.

Function sequence 

The navigation system integrated into the radio and navigation unit (A2/56) uses the data entered to calculate the data required to reach the destination (destination-oriented navigation). The following subfunctions are described in separate service information:

The route is calculated in accordance with the options set. If observance of the options is not possible, then the options set are ignored for the sections in question and a message is displayed and signaled audibly. The set options can be displayed and changed at any time. After the calculation, the route is indicated by arrow symbols on the display of the radio and navigation unit and in the instrument cluster (A1). An acoustic announcement is then made, saying "The route is calculated".

If the vehicle is no longer moving on the pre-calculated route, then the route is recalculated. If the recalculated values are plausible for the navigation system, then the modified route is displayed. An alternative route is offered under dynamic route guidance if there is a traffic jam or a road block on the calculated route.

The system can be activated or deactivated or the destination and street can be entered using the following components:

The control signals are processed internally for direct entries via the operating panels on the radio and navigation unit.

The voice input for the voice control system, with code (511) Audio 50 APS with DVD changer, is performed by means of the hands-free system microphone group (A67b1). The spoken word is converted into an electrical signal via the hands-free system microphone group and then forwarded to the radio and navigation unit via a direct line.

REFER TO SYSTEM WIRING DIAGRAMS Electrical function diagram for navigation mode (APS), function Model 164 PE82.61-P-2054-97MAA
Model 251 PE82.61-P-2054-97RAA
  Position finding and destination-oriented navigation, function   GF82.61-P-2010GQA
  Route guidance through voice output, function   GF82.61-P-2011GQA
  Display compass, function With code (245) Electronic compass GF54.30-P-2021GQ