Section 142 (Rear Wall & Rear End -- E550 (211.290))
WARNING: This page is about a different car, the 2009 Mercedes-Benz E550 and 2008 Mercedes-Benz E550. However, it is still accessible from the selected car via links, so may be relevant.
- General Information
- Testing & Repair
- Testing and repair work: Passenger cars: Rear wall and rear end - AR64.00-Z-9211AA
- Separate outer part of rear center section - AR64.20-P-1000-01TA
- Install rear center section and outer section - AR64.20-P-1000-04TA
- Prepare outer part of rear center section - AR64.20-P-1000-09TA
- Install and weld in outer part of rear center section - AR64.20-P-1000-10TA
- Replace complete bottom rear center section - AR64.20-P-1000TA
- Remove, install outer part of rear center section - AR64.20-P-1010TA
- Install longitudinal member end element and weld in - AR64.20-P-1200-05T
- Separate deformed rear area - AR64.20-P-1200-11TA
- Prepare longitudinal member with console and reinforcement - AR64.20-P-1200-30TA
- Install spare wheel well, longitudinal member with bracket and reinforcement - AR64.20-P-1200-31TA
- Left side rear end damage - AR64.20-P-1200TA
- Prepare end section on rear longitudinal member - AR64.20-P-1240-02TA
- Prepare spare wheel recess* - AR64.20-P-1245-02TA
- Torque Specifications
- Special Tools
- 201 589 00 27 00 Cross-brace - WS64.00-P-0012K
- 211 589 01 27 00 Pulling device - WS64.00-P-0110K
- 211 589 07 23 00 Template - WS64.00-P-0111K
- 211 589 08 23 00 Template - WS64.00-P-0112K
- 164 589 00 39 00 Embossing tool - WS64.00-P-0115K
- Special tools: Passenger cars: Rear wall and rear end - WS64.00-Z-9999AZ