Wiring diagram for KEYLESS GO control unit - PE80.61-P-2101FAA
MODEL 204.0/2/3/9 with CODE (889) KEYLESS-GO
Control unit N69/5
| Wiring diagram for Keyless Go control unit | PE80.61-P-2101-97FAA | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Use of wiring diagrams | OV00.01-P-1901-03FAA | |
| Search aid for all wiring diagram groups | OV00.01-P-1901FAA | |
| Search aid for all electrical components | OV00.01-P-1909FAA | |
| Abbreviations of signal and circuit designations for wiring diagrams | OV00.01-P-1001-28FAA | |
| Location and assignment of line and plug connectors | GF00.19-P-1000FAA | |
| Location and assignment of ground points | GF00.19-P-2000FAA | |
| Location and assignment of Z connector sleeves (line connectors in wiring harness) | GF00.19-P-3000FAA | |
| Overview of wiring diagrams covering multiple function groups | PE00.19-P-1100FAA | |
| Fuse and relay box, as-built configuration | MODEL 204.0/2 up to model year 08/YoM 07 | GF54.15-P-0800CW |
| Fuse and relay box, as-built configuration | MODEL 204.0/2 as of model year 2009/YoM 08 MODEL 204.3 MODEL 204.9 |
GF54.15-P-0800CE |
| Repair wiring harness as per specified repair method | The original wire color is visible again after the repair line (length about 30 cm). |
AR00.19-P-0001A |