Removal And Installation Of The Bracket For The Electric Motor Of The Electric Step - Ar88.30-D-8504TS
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2018 Mercedes-Benz Sprinter 3500XD, 2018 Mercedes-Benz Sprinter 3500, 2018 Mercedes-Benz Sprinter 2500, 2017 Mercedes-Benz Sprinter 3500XD, and 2017 Mercedes-Benz Sprinter 3500. However, it is still accessible from the selected car via links, so may be relevant.
Type 906
with code T57 (electric step, loading space sliding door, right)
Type 906
with code T58 (electric step, loading space sliding door, left)
| Risk of injury
from cuts or Scratches on sharp-edged vehicle parts |
Always wear protective gloves when working on or in the area of sharp, unburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Remove, install | |||
| 1 | Remove the connecting rods for the electric step from the gears (3, 7). | AR88.30-D-8502TS | |
| 2 | Cable holder on the upper part of the housing |
*BA88.30-N-1012-02A | |
| 3 | Unclip electrical wiring harness (6) from holder (1) (arrows A). | Fig 1 | |
| 4 | Detach the electric motor of the electric step from the holder (1). | Type 906 | AR88.30-D-8505TS |
| 5 | *BA88.30-N-1006-02A | ||
| 6 | Installation in reverse order. |
ELECTRIC STEPS
| Number | designation | Type 906 apart from code P0E (master code Sprinter Tourer 16 + 1 domestic) apart from code P0F (master code Sprinter Tourer 19 + 1 domestic) apart from code P0G (master code Sprinter Tourer 16 + 1) apart from code P0H (master code Sprinter Tourer 19 + 1) apart from code PE4 (master code bus DCAA from Argen) apart from code PE5 (master code bus platform seating from Argen) | |
|---|---|---|---|
| BA88.30-N-1006-02A | Screw holder for electric motor on upper part of the housing | Nm | 20 |
ELECTRIC STEPS
| Number | designation | Type 906 apart from code P0E (master code Sprinter Tourer 16 + 1 domestic) apart from code P0F (master code Sprinter Tourer 19 + 1 domestic) apart from code P0G (master code Sprinter Tourer 16 + 1) apart from code P0H (master code Sprinter Tourer 19 + 1) apart from code PE4 (master code bus DCAA from Argen) apart from code PE5 (master code bus platform seating from Argen) | |
|---|---|---|---|
| BA88.30-N-1012-02A | Screw the cable holder to the upper part of the housing | Nm | 10 |