Remove/install fluid reservoir - AR83.30-P-6520SX

MODEL 216.3, 221.0/1 

Shown on model 221 

Fig 1: Identifying Fluid Reservoir Remove/Install Components - Shown On Model 221

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Discharge air conditioning system	Evacuate, refill and check air conditioner for leaks and proper operation.	AR83.30-P-1760SX
2	Disconnect air conditioning evacuation, recycling and charging unit for refrigerant R134a	Air conditioning service unit
3	Remove rear section of fender liner in left front fender
4	Detach and seal refrigerant lines (3, 5)	Renew sealing rings of refrigerant lines (3, 5) and moisten with compressor oil.
			*BA83.30-P-1005-01K
			Figure
5	Remove nuts (6) and remove fluid reservoir (1)	Once the packaging of the new fluid reservoir (1) has been opened, it must be installed within 20 min and the entire refrigerant circuit sealed, as otherwise the function of the fluid reservoir (1) can no longer be guaranteed.
			*BA83.30-P-1008-01K
6	Install in the reverse order

AIR CONDITIONING

Number	Designation		Model 221	Model 216
BA83.30-P-1005-01K	Screw, high pressure line to fluid reservoir	Nm	8	8
BA83.30-P-1008-01K	Nut for fluid reservoir to longitudinal member	Nm	6	6

Fig 2: Identifying Set Of Stop Plugs (129 589 00 91 00)

Courtesy of MERCEDES-BENZ USA