Remove/install loudspeaker amplifier control unit - AR82.62-P-7720CW
MODEL 204.0 /2 /3 with CODE (810) Sound system
Shown on model 204.0
Shown on model 204.2, right side
| Remove/install | |||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on avoiding damage to optical fibers during repair work | AH82.60-P-0001-05AK | ||
| 1 | Buffer basic data of sound system amplifier control unit (N40/3) in STAR DIAGNOSIS | ||
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A | ||
| 2 | Switch off ignition and remove transmitter key (A8/1) or KEYLESS-GO start/stop button (S2/3) from electronic ignition lock control unit (N73) | KEYLESS-GO start/stop button only on vehicles with code (889) Keyless-Go. | |
| 3 | Remove cover for rear center section (1) and release side panel at left (2) far enough to enable the sound system amplifier control unit (N40/3) to be removed | Only on model 204.0/3 | AR68.30-P-4600CW |
| 4 | Remove trim from rear end center assembly | Only on model 204.2 | AR68.30-P-4785CX |
| 5 | Unscrew plastic nuts (7) | Only with model 204.2 only with code (942) EASY-PACK load-securing kit (load compartment package) | |
| 6 | Take off cover (8) | Only with model 204.2 only with code (942) EASY-PACK load-securing kit (load compartment package) | |
| 7 | Remove bolts (9) | Only with model 204.2 only with code (942) EASY-PACK load-securing kit (load compartment package) | |
| 8 | Remove mounting console (10). | Only with model 204.2 only with code (942) EASY-PACK load-securing kit (load compartment package) | |
| 9 | Unscrew nuts (3) | ||
| 10 | Detach electrical connectors (5, 6) | ||
| 11 | Remove bracket (4) with sound system amplifier control unit (N40/3) | ||
| 12 | Remove bracket (4) of sound system amplifier control unit (N40/3) | ||
| 13 | Install in the reverse order |