Remove/install armrest on front door - AR72.10-P-1033V

MODEL 171.4 

Fig 1: Identifying Front Door Armrest Components

Courtesy of MERCEDES-BENZ USA

	Remove
1	Remove door liner (1) from left and right front door	Put down door liner (2) on a suitable base to avoid damage.	AR72.10-P-1000V
2	Separate plastic bonded points (3) in armrest (1)	Do not operate at excessive speed because the plastic becomes too hot, melts and galls the spherical cutter.
			*WH58.30-Z-1002-01A
3	Unscrew bolts (4) and remove armrest (1) with door handle (5)
4	Remove plastic residues from door liner (2).
5	Remove bracket (6)	Note correct installation positions.
6	Unscrew bolt (7) and remove door handle (5) from armrest (1)
	Install
7	Insert door handle (5) into armrest (1) and screw in bolt (7)
8	Insert bracket (6) into armrest (1)
9	Insert armrest (1) into door liner (2)
10	Press clamping plates (8) over pins (10) (arrows) of armrest (1).	Use 10 mm socket wrench. Clamping plates (8) should make firm contact to door liner (2). Clamping plates (8) are not installed in the pins (9).
11	Install door liner (2) on left and right front door		AR72.10-P-1000V

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1002-01A	Ball cutter, dia. 12 mm