Convenience closing/opening, function - GF72.29-P-3002SO

MODEL 171.4 

When actuating the Vario roof actuation switch 

The two front windows when the Vario roof is open and the front and rear windows when the Vario roof is closed can be opened and closed centrally with the touch control of the Vario roof actuation switch (S84s1).

Function 

Actuate Vario roof actuation switch (S84s1) two times within 0.5 s in the corresponding direction and hold down.

The signal is transmitted by the upper control panel control unit N72/1) via the controller area network bus, class B (interior compartment) (CAN B). The left door control unit (N69/1) actuates the left front power window motor (M10/3). The right door control unit (N69/2) actuates the right front power window motor (M10/4).

The left rear power window motor (M10/5) and the right rear power window motor (M10/6) are actuated by the power soft top control unit (N52)

Actuation in the "closing" direction is performed as manual raising Actuation in the "opening" direction is performed as automatic lowering

The actuation in the "closing" direction is inhibited for the rear windows until the front windows are closed