Programming of control units with XD-DVD - AR54.21-P-0014Y: Notes
MODEL 117, 129.058 /063 /067 /076, 156, 163, 164, 166, 168, 169, 170, 171.4, 176, 199, 203, 204, 205, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 222, 230, 231, 240, 242, 246, 251, 450.3/4, 452.3/4, 454.0
Program with XD-DVD
| Program using "Xentry Diagnostics" (XD) | AH54.21-P-0001-03Y | ||
| 1 | Connect diagnosis system and start XD | AD00.00-P-2000-04A | |
| 2 | Program control unit | AR54.21-P-0014-01Y | |
| 3 | Perform software calibration number (SCN) coding for control units | Only when required | AR54.21-P-0015X |
| 4 | Run teach-in procedures | Only when required | |
| 5 | Read out and erase fault memory | ||
| 6 | Disconnect diagnosis system | AD00.00-P-2000-04A |